Customer Helpline


+49 37206 880 684
Mon-Fri 13.00-20.00

 

Customer reviews


 
very good
 
4.92 / 5.0
 

Certified shop



 
Show all articles from: with sound
 
 
 
 
ZIMO MX659N18, N-H0 sound-decoder, Next18 connector, 0,7A, 4 function outputs
Article No.: MX659N18
 
Manufacturer Suggested Retail Price: 104,00 EUR
 
93,60 EUR
incl. 19,00% VAT. plus shipping costs
 
 
Availability: in stock • 1-5 days in Germany, other European countries 5-11 days
 
 
 
Before buying, select a sound for this decoder here  
      configurate
 

Buy more and save more!

from 3 piece
92,55 EUR
from 5 piece
91,00 EUR
from 10 piece
88,40 EUR
 
 Warning: This product is in accordance with EU Directive 2009/48/EC not suitable for children under 14 years!
 
ZIMO MX659N18, N-H0 sound-decoder, Next18 connector, 0,7A, 4 function outputs

Manufacturer: ZIMO
Article number: MX659N18
Electrical interface: Next18 to NEM 662 (direct plug connector)
Digital protocol: DCC and MM (Märklin-Motorola)
Dimensions (LxWxH mm): 20x9,5x3,5
Motor nominal current: 0,7 A (peak current 1,5 A, approx. 20 seconds)
Back-EMF motor regulation: available
Function outputs: 4 (0,5 A max. current carrying capacity)
Switching inputs: 1
Other connections: 2 logic level outputs or 2 servo outputs or SUSI
Audio power: 1 watts in 8 ohms

To guarantee the currentness of the information and to not burden the environment unnecessarily,
the manual of the ZIMO decoder is availlable as a downloadable PDF only.



General:
  • DCC addresses 1 ... 10239, consist addresses 1 ... 127, MM addresses 1 ... 80, Functions F0 ... F20
  • 14, 28 or 128 (external) speed steps, 256 or 1024 internal steps
  • Programming CVs in „service mode“ (on the Programming Track) and in „operational mode“
  • Uninterrupted operation (without Decoder Reset or New Start) during lost contact of up to 1 or 2 sec (even without external energy storage/capacitors)
  • UPS - Avoids stopping on de-energized rail sections - from insulated frog or dirt (requires external energy storage/capacitors)
  • DC Analogue operation, detected automatically, either regulated or unregulated
  • AC Analogue operation (including Märklin impulse control to change direction)
  • Updateable Software: New Software Versions can be loaded without opening the loco, with help from the ZIMO Decoder Update Device MXULF, or the MX31ZL System CAB or the MX10 base station; from Computer with ZIRC (the „ZIMO Rail Centre“) or direct from a USB-Stick (with MX31ZL or MX10).

Safety:
  • Current overload protection on all outputs, temperature overload protection, See details under „Continuous Current“ and „Peak Current“
  • Protection against voltage spikes of the motor through suppressor diodes

Motor control and regulation:
  • low-noise, high frequency motor control with either 20 or 40 kHz
  • suitable for all DC motors and coreless motors (Faulhaber, Maxxon) and (with additional diodes) AC motors
  • also for „hard cases“, such as the Fleischmann „round“ motor, or old (only low frequency compatible) motors
  • ZIMO motor control with self-optimization and numerous settings for manual optimization
  • Speed curve via 3 CV settings or freely programmable in 28 point speed curve (as in NMRA standard)
  • km/h-speed control (per Speed Step - 1/2 km/h, 1 km/h or 2 km/h) as alternative to conventional speed control
  • Adjustable compensation for gear back-lash during direction changes in order to reduce start-up jolt
  • ZIMO acceleration settings (NMRA standard, in addition, „exponential“ for soft start/stop, „adaptive“ against start-up jolt)
  • Shunting function (half-speed, reduction or shutdown of momentum/braking effects selectable via F3, F4, or MAN keys)

Functions and function outputs:
  • full NMRA function mapping for F0 - F12, and ZIMO extensions (directional assignments, Swiss light effects etc.)
  • dimming, flashing, US effects (mars, ditch, strobe,...) and other light effects (soft start, brake light, auto time-out,...)
  • High bream/low beam headlight changeover via function key
  • time limited (un)coupling control for Krois and Roco, with „uncoupling dance“ (or „waltz“) (automatic move in slightly, unhook and move away)

Train control and feedback:
  • DC braking distance, ABC (stopping on asymmetrical DCC signal), Märklin braking section
  • ZIMO „signal dependent train control“ (HLU) with speed limits in 5 steps and „stop before red signal“
  • ZIMO loco number recognition only with ZIMO DCC system and ZIMO track section modules
  • constant braking with two variants (either always start braking immediately, or later, when speed is low, to stop in same place)
  • RailCom: km/h feedback, CV „on-the-main“ read-out and confirmed programming, RailCom address feedback, and many more RailCom applications in future software releases.

Sound:
  • Loading of new sound projects is similar (using same equipment) as loading new software versions, (see SW Update, above)
  • Sampling rate 22 kHz (most used) or 11 kHz, up to 6 sound channels played simultaneously (e.g. steam chuffs, air pump whistle,...)
  • Synchronization of the steam chuffs either by connecting a real cam sensor (LED mechanical, Hall), or simulated virtual cam sensor, both for sound as well as for the fan and smoke control
  • Acceleration and load dependence can be automatically adjusted by a test drive to set the load sensitivity parameters and many other features, see the ZIMO Sound Database and the User Manuals.

„RailCom“ is a Trade Mark of Lenz GmbH
Source: www.zimo.at
Ihre Meinung ist wichtig!
An dieser Stelle haben Sie die Möglichkeit, Ihre Meinung und Erfahrungen über das vorstehende Produkt zu dokumentieren. Damit liefern Sie anderen Interessenten wertvolle Informationen und praktische Orientierung beim Kauf.
Legen Sie einfach los - auch wenn Sie an dieser Stelle der oder die Erste sein sollten. In nur zwei Minuten ist Ihre Meinung über ein Produkt aussagekräftig zusammengefasst.
Also, was können Sie berichten?
Wir freuen uns darauf!

Write the first rating!